SiO2-Coating of Polystyrene Particles by Sol-Gel Process
نویسندگان
چکیده
منابع مشابه
Synthesis and characterization of maleimide-functionalized polystyrene-SiO2/TiO2 hybrid nanocomposites by sol–gel process
Maleimide-functionalized polystyrene (PSMA-SiO2/TiO2) hybrid nanocomposites were prepared by sol-gel reaction starting from tratraethoxysilane (TEOS) and titanium isopropoxide in the solution of polystyrene maleimide in 1,4-dioxane. The hybrid films were obtained by the hydrolysis and polycondensation of TEOS and titanium isopropoxide in maleimide-functionalized polystyrene solution followed by...
متن کاملEffect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method
Zirconium and its alloys have many applications in orthopedic medicine and compared to stainless steel, titanium and other metals used in the manufacture of implants has higher strength and corrosion resistance. Research shows that the method of preparation and surface modification before coating process has a significant impact on improving the metal implants among which include the sandblasti...
متن کاملOptical filters from SiO2 and TiO2 multi-layers using sol–gel spin coating method
Sol–gel spin coating process is used to produce optical filters from SiO2 and TiO2 multilayers. By coating the films symmetrically on both sides of the glass substrates, we designed two types of three-layer anti-reflective (AR) filters for the near–infrared region, and a ninelayer reflective filter for the near–UV region. We develop a simple theoretical model for these filters, which incorporat...
متن کاملGlass coating for PDMS microfluidic channels by sol-gel methods.
Soft lithography using polydimethylsiloxane (PDMS) allows one to fabricate complex microfluidic devices easily and at low cost. However, PDMS swells in the presence of many organic solvents significantly degrading the performance of the device. We present a method to coat PDMS channels with a glass-like layer using sol-gel chemistry. This coating greatly increases chemical resistance of the cha...
متن کاملElectroosmotic flow controllable coating on a capillary surface by a sol-gel process for capillary electrophoresis.
A simple coating procedure employing a sol-gel process to modify the inner surface of a bare fused-silica capillary with a positively charged quaternary ammonium group is established. Scanning electron microscopic studies reveal that a smooth coating with 1 to approximately 2 microm thickness can be obtained at optimized coating conditions. With 40 mM citrate as a running electrolyte, the plot ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1998
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.71.100