Sintering of WC Powder and WC-Co Mixed Powder under High Pressure
نویسندگان
چکیده
منابع مشابه
Liquid Phase Sintering of (Ti,Zr)C with WC-Co
(Ti,Zr)C powder was sintered with WC-Co following an industrial process, including an isotherm at 1410 °C. A series of interrupted sintering trials was performed with the aim of studying the sintering behavior and the microstructural evolution during both solid-state and liquid-state sintering. Reference samples, using the same elemental compositions but with the starting components TiC and ZrC...
متن کاملSintering and Characterizations of WC-20wt.% (Fe,Co) Nano-Structured Powders Developed by Ball-Milling
The aim of the present work is to study the effects of the nanostructured WC-20 wt. % (Fe,Co) with different ratios of iron to cobalt on the microstructure and hardness of sintered samples. Furthermore, a sample with a cobalt binder under the same condition was produced for the comparison purposes. The nanocomposite development, after different milling times, has been monitored by means of X-ra...
متن کاملFRACTURE AND FATIGUE BEHAVIOR OF WC-Co AND WC-CoNi CEMENTED CARBIDES
The fracture and fatigue characteristics of several cemented carbide grades are investigated as a function of their microstructure. In doing so, the influence of binder chemical nature and content (Co and 76wt%Co-24wt%Ni), as well as carbide grain size on hardness, flexural strength, fracture toughness and fatigue crack growth (FCG) behavior is evaluated. Mechanical testing is combined with a d...
متن کاملبررسی رفتار سایشی کامپوزیت‌های WC-10wt%Co تجاری، WC-40vol%Co و WC-40vol%FeAl-B در دمای محیط
در این پژوهش رفتار سایشی کامپوزیت‌های تجاری WC-10wt%Co (H10F)، WC-40vol%Co و کامپوزیت‌های WC-40vol%FeAl-B با مقادیر مختلف بور از صفر تا ppm1000 به روش پین روی دیسک بررسی شد. آزمون‌های سایش در دمای محیط، تحت بار 40 نیوتن و طی مسافت 100 متر انجام شدند. سطوح سایش به وسیله میکروسکوپ الکترونی روبشی (SEM) مورد بررسی قرار گرفت. نتایج نشان داد که در بین نمونه‌ها، کامپوزیت WC-40vol%FeAl بدون بور کمترین ...
متن کاملGeometric and Crystallographic Characterization of WC Surfaces and Grain Boundaries in WC-Co Composites
Electron backscattered diffraction has been used to determine the orientation of WC crystals in a WC-Co composite and atomic force microscopy has been used to measure the shapes of planar sections of the same crystals. A stereological analysis has been used to determine that { } 1010 prism facets and the {0001} basal planes are the WC surfaces that are most frequently in contact with Co. Furthe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1967
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.31.2_177