Sintering of oxygen ion conductive ceramics and their electrical properties
نویسندگان
چکیده
منابع مشابه
architecture and engineering of nanoscale sculptured thin films and determination of their properties
چکیده ندارد.
15 صفحه اولStructural and Electrical Properties of BNT-BT0.08 Ceramics Processed by Spark Plasma Sintering
(Bi0.5Na0.5)TiO3 doped with 8 mol % BaTiO3 powder (BNT-BT0.08), prepared by sol-gel method was compacted and sintered by Spark Plasma Sintering (SPS) process. The influence of SPS temperature on the densification of BNT-BT0.08 ceramic was investigated. Starting from sol-gel nanopowder of BNT-BT containing 8 mol % BaTiO3 with an average particles size of about 30 nm, were obtained ceramics with ...
متن کاملSintering Behavior and Properties of Iron-Rich Glass-Ceramics
Iron-rich glass-ceramics were obtained by the sintering of two glass powders, labeled G1 and G2, at heating rates of 5° and 20°C/min followed by an isothermal step in the 850°–1050°C temperature interval. The sintering process was evaluated by the linear shrinkage; the closed porosity was estimated by density measurements; the structure and the morphology of the glass ceramics were observed by ...
متن کاملSintering of Ceramics
Sintering with low frequency rf power (-50 M H z ) is a new technique with unique capabilities that has been used to sinter a variety of ceramic materials, including zirconia-toughened alumina, alumina, silicon carbide, and boron carbide. Processing with low frequencies offers many advantages compared to processing with conventional microwave frequencies (915 MHz and 2.45 GHz). Because of the l...
متن کاملDirect Laser Sintering of Ceramics
For more than one decade layer manufacturing technologies assist the development of new products. Due to a layer-wise build-up of a three-dimensional geometry, nearly every complex design is producible in a short period of time. Selective Laser Sintering is a powderbased technique to produce plastic prototypes (Rapid Prototyping) or metal mould inserts (Rapid Tooling). The laser sintering of ce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Lithuanian Journal of Physics
سال: 2012
ISSN: 1648-8504
DOI: 10.3952/lithjphys.52306