Sintering of Astroloy-Y2O3 particulate composites
نویسندگان
چکیده
منابع مشابه
Development of AlN and TiB2 Composites with Nb2O5, Y2O3 and ZrO2 as Sintering Aids
The synthesis of AlN and TiB2 by spark plasma sintering (SPS) and the effect of Nb2O5, Y2O3 and ZrO2 additions on the mechanical properties and densification of the produced composites is reported and discussed. After the SPS process, dense AlN and TiB2 composites with Nb2O5, Y2O3 and ZrO2 were successfully prepared. X-ray diffraction analysis showed that in the AlN composites, the addition of ...
متن کاملSynthesis and Characterization of Y2O3/SiO2 Composites
Impregnation and deposition-precipitation syntheses have been used to obtain Y2O3/SiO2 samples. In the deposition method, the urea causes the precipitation of yttrium hydroxide, which leads to the formation of yttria nanocrystalline particles in the final composites. Delaying the silica addition up to the visible muddying of the solution, a relevant formation of yttria nanocrystalline particles...
متن کاملComputational Analysis of Viscoelastic Particulate Composites
With the objective of achieving composite material systems that feature high stiffness and high mechanical damping, consideration is given here to unit cell analysis of particulate composites with high volume fraction of inclusions. Effective elastic properties of the composite are computed with computational homogenization based on unit cell analysis. The correspondence principle together with...
متن کاملFracture Toughness of Polypropylene-Based Particulate Composites
The fracture behaviour of polymers is strongly affected by the addition of rigid particles. Several features of the particles have a decisive influence on the values of the fracture toughness: shape and size, chemical nature, surface nature, concentration by volume, and orientation. Among those of thermoplastic matrix, polypropylene (PP) composites are the most industrially employed for many di...
متن کاملSelf-healing of damaged particulate materials through sintering
Particulate materials loaded under uniaxial compression and tension are studied using the Discrete Element Method (DEM). Self-healing of the damaged samples is activated through sintering, a process that effectively increases the contact adhesion (i.e., the tensile strength) between particles. The initial sample is prepared from spherical particles by applying high (isotropic) pressure, where p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2002
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos0201013r