Sintering of 17-4PH stainless steel feedstock for metal injection molding

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Comparison of Mechanical, Metallurgical Properties of 17-4PH Stainless Steel between Direct Metal Laser Sintering (DMLS) and Traditional Manufacturing Methods

The purpose of this research was to analyze and compare the mechanical properties of parts made using both Direct Metal Laser Sintering (DMLS) and traditional manufacturing methods like casting or forging. Previous research in DMLS was conducted using various materials, but there has been very little done for 17-4PH stainless steel. All the samples used for testing were conducted using the EOSI...

متن کامل

Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling

17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...

متن کامل

Machinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling

17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...

متن کامل

Development of Metal Plate with Internal Structure Utilizing the Metal Injection Molding (MIM) Process

In this study, we focus on making a double-sided metal plate with an internal structure, such as honeycomb. The stainless steel powder was used in the metal injection molding (MIM) process. The preliminary studies were carried out for the measurement of the viscosity of the stainless steel feedstock and for the prediction of the filling behavior through Computer Aided Engineering (CAE) simulati...

متن کامل

Microstructural Study of 17-4PH Stainless Steel after Plasma-Transferred Arc Welding

The improvement of the surface qualities and surface hardening of precipitation hardened martensitic stainless steel 17-4PH was achieved by the plasma-transferred arc welding (PTAW) process deposited with Co-based alloy. The microstructure of the heat affected zone (HAZ) and base metal were characterized by optical microscope (OM), scanning electron microscope (SEM) and transmission electron mi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Letters

سال: 2008

ISSN: 0167-577X

DOI: 10.1016/j.matlet.2008.03.027