Sintering and Characterization of SiC Reinforced Ni Powders in Microwave Furnace

Comparison between microwave and microwave plasma sintering of nickel powders

There is considerable interest in processing technologies which can lead to more energy efficient sintering of metal powders. The use of microwave sintering in particular leads to reduced energy usage during sintering as the volumetric heating process is considerably more efficient compared with resistance heating. In this study the use of a novel plasma microwave processing technology for the ...

Ultra High Temperature Microwave Sintering – Furnace and Process Design

Scale up of microwave sintering for high temperature stable non-oxide ceramics, such as SiC, Si3N4, and dispersion ceramics, like SiC-MoSi2 is still difficult, mainly because of lack of an affordable equipment. For air atmosphere sintering different furnaces were developed, like e.g., gas-microwave hybrid heated tunnel kilns [1] or microwave sintering using an adiabatic casket in tunnel kilns [...

Characterization of Ni-implanted GaN and SiC

High concentrations ( /10 cm ) of Ni were introduced into GaN and SiC by ion implantation at 350 8C. On subsequent annealing at 700 8C, there was more residual lattice damage in GaN compared to SiC. Both materials showed ferromagnetism with transition temperatures below 50 K. No secondary phases could be detected by transmission electron microscopy (TEM) or selected area diffraction in either G...

Synthesis and Characterization of Nano Boron Nitride Reinforced Magnesium Composites Produced by the Microwave Sintering Method

In this study, magnesium composites with nano-size boron nitride (BN) particulates of varying contents were synthesized using the powder metallurgy (PM) technique incorporating microwave-assisted two-directional sintering followed by hot extrusion. The effect of nano-BN addition on the microstructural and the mechanical behavior of the developed Mg/BN composites were studied in comparison with ...

Sintering of Zircon Powders