Sintered Compact Properties of Pre-alloyed 2%Ni-Fe Water Atomized Powder
نویسندگان
چکیده
منابع مشابه
Structural Characterization and Ordering Transformation of Mechanically Alloyed Nanocrystalline Fe-28Al Powder
The synthesis of nanocrystalline Fe3Al powder by mechanical alloying as well as the structural ordering of the synthesized Fe3Al particles during the subsequent thermal analysis were investigated. Mechanical alloying was performed up to 100 hours using a planetary ball mill apparatus with rotational speed of 300 rpm under argon atmosphere at ambient temperature. The synthesized powders were cha...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملa study of mechanical properties and fracture mechanisms of powder metallurgy parts prepared using semi pre-alloyed steels
in the present study, the mechanical properties and fracture mechanisms of two powder metallurgy low alloy steels, i.e. distaloy dh and distaloy hp, were investigated. all samples were sintered at 1120 ºc for 30 min in n2/h2 atmosphere. for evaluation of the effect of cooling rate on final properties, samples were cooled from sintering temperature with two different cooling rates. in addition, ...
متن کاملOptimized production route of WC powder pre-alloyed with Ta for fine grained cemented carbides
Article history: Received 30 March 2016 Received in revised form 13 May 2016 Accepted 22 May 2016 Available online 24 May 2016 Powders of hexagonal (W,Ta)Cwere produced following a two-step carburization processwith (W,Ta)2C powder as an intermediate product. XRD measurements indicate that higher temperatures during the first carburization step increase the fraction of Ta in the (W,Ta)2C struct...
متن کاملXANES of Mechanically Alloyed Y-Fe System
We have measured X-ray absorption near edge structure (XANFS) of mechanically alloyed YzFe and YFez system as a fundion of milling time. An amorphous phase is obtained by mechanical alloying for 100 hours in the YzFe system and for 500 hours in the YFez system. In both systems the intensity of Fe Is-4pn transition grows up significantly with increasing the milling time and approaches to that of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2005
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.52.437