Sinter strength evaluation using process parameters under different conditions in iron ore sintering process
نویسندگان
چکیده
منابع مشابه
Influence of Preformation Process on Combustibility of Biochar and its Application in Iron Ore Sintering
A study was carried out into the use of preformation process to prepare biochar for replacing coke breeze in iron ore sintering. Two types of preformation process, thermo-compression process (TCP) and normal temperature process (NTP), were adopted. Results show that preformation contributed to improving the density of both raw biomass and biochar. Recommended preformation parameters for TCP wer...
متن کامل8YSZ sintering by flash sintering method and evaluation of process parameters
Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...
متن کاملHarmful Admixtures Assessment in Sinter Mixtures Used in Iron Ore Sinter Plants in Poland
J. Korol, Central Mining Institute, Department of Material Engineering, Poland D. Burchart-Korol, A. Smoliński, Central Mining Institute, Department of Energy Saving and Air Protection, Poland In this study composition of sinter mixtures used in Polish sinter plants were established. Seven sinter mixtures composition were examined, based on iron-bearing materials, admixtures and fuels.
متن کاملThe Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions
Copper is an interesting material for printed electronics inks because, for example, of its good conductivity and lower raw material price compared to silver. However, post-processing Cu inks is challenging because of non-conductive copper oxide. In this work, inkjet-printed Cu nanoparticle structures were sintered on a polyimide substrate with a continuous-wave 808-nm diode laser. Laser sinter...
متن کاملEffect of Using Oxygen-Enriched Gas during Induration Process of Iron Ore Pellets Containing Solid Fuel
In this research, the effects of oxygen injection during the induration process were studied in order to improve the quality specifications and increase the rate of production of the iron oxide pellets. Several experiments were carried out in palletizing pilot plant in different conditions of oxygen injection. The results suggested that if only the extra oxygen was injected into the furnace in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Thermal Engineering
سال: 2016
ISSN: 1359-4311
DOI: 10.1016/j.applthermaleng.2016.03.034