Sinter-bonding of Cr3C2-Ni Base Cermets onto Steel Substrates.
نویسندگان
چکیده
منابع مشابه
Properties of Ni/ysz Cermets Depending on Their Microstructure
A cermet (ceramic metal composite) of Nickel and Yttria stabilized Zirconia (YSZ) is the most commonly used fuel electrode for Solid Oxide Fuel Cells (SOFC). The properties of such cermets depend strongly on their microstructure. Several Ni/YSZ cermet samples with different Ni content and Ni and 8YSZ grain size have been prepared. The thermal expansion coefficient (TEC) of these samples was mea...
متن کاملInfluence of nitrogen ion implantation on the nanostructure and corrosivity of Ni/stainless steel substrates
Ion implantation is a surface modification technology to produce new material on the surface by impingement of high energy ions from the ion accelerator. In this work, AISI 304 stainless steels were coated with 90 nm Ni film by electron beam deposition and implanted by a flow of 5×1017 N cm−2 at 400 K temperature with different implantation energies of 10, 20, 30 and 40 keV. The prepared sample...
متن کاملSynthesis of NiO nanowalls by thermal treatment of Ni film deposited onto a stainless steel substrate.
Two-dimensional nanostructures have a variety of applications due to their large surface areas. In this study, the authors present a simple and convenient method to realize two-dimensional NiO nanowalls by thermal treatment of a Ni thin film deposited by sputtering onto a stainless steel substrate. The substrate surface area is supposed to be significantly increased by creating nanowalls. The e...
متن کاملJoining of TiAl to Steel by Diffusion Bonding with Ni/Ti Reactive Multilayers
Dissimilar diffusion bonds of TiAl alloy to AISI 310 stainless steel using Ni/Ti reactive multilayers were studied in this investigation. The Ni and Ti alternating layers were deposited by d.c. magnetron sputtering onto the base materials, with a bilayer thickness of 30 and 60 nm. Joining experiments were performed at 700 and 800 ̋C for 60 min under pressures of 50 and 10 MPa. The effectiveness...
متن کاملEffect of bonding time on microstructure and mechanical properties during TLP bonding of nickel-base superalloys Hastelloy C276 and Stainless Steel AISI316
Joining of Hastelloy C276 nickel-base superalloy to AISI316 Stainless Steel using BNi-2 interlayer performed by transient liquid phase process (TLP) at 1150°C for 5 and 30 minutes. Bonding microstructure was studied using an Optical microscope and a scanning electron microscope (SEM). Vickers hardness test and shear strength test have been used to evaluate the mechanical properties. Microstruct...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1996
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.43.510