Single-row laser beam with energy strengthened ends for continuous scanning laser surface hardening of large metal components
نویسندگان
چکیده
منابع مشابه
Optimization of Laser Beam Transformation Hardening by One Single Parameter
The process of laser beam transformation hardening is principally controlled by two independent parameters, the absorbed laser power on a given area and the interaction time. These parameters can be transformed into two functional parameters: the maximum surface temperature and the hardening depth. It has been proved that with a constant hardening depth the results (hardness. residual stress. e...
متن کاملThermal Analysis of Laser Hardening for Different Moving Patterns
Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...
متن کاملLaser Beam Hazard for flight personnel
Lasers can produce a beam of light of such intensity that permanent damage to human tissue, in particular the retina of the eye, can be caused instantaneously, even at distances of over 10 km. At lower intensities, laser beams can seriously affect visual performance without causing physical damage to the eyes; causing transient damage or causing sensation and loss of focus. Laser illumination o...
متن کاملAltitude measurement using laser beam reflected from water surface
In this paper altitude measurement from water surface using laser beam is presented. Research data indicate that the reflection of infrared waves from water surface is about zero and it is less than 2% for visible radiations. Phase-shift and heterodyne technique was used for the measurement, and the laser beam ( mW p nm 10 , 700 = = l ) was modulated by a sine wave having a fixed frequency....
متن کاملBottle beam from a bare laser for single-beam trapping.
We demonstrate that a laser beam converging from a specific transverse mode is a bottle beam, as described in J. Opt. Soc. Am. B 20, 1220 (2003). To our knowledge, this is the first time that a bottle beam has been generated directly from a laser. By calculating the radiation forces on a dielectric Rayleigh sphere in the bottle beam, we show that the single beam can trap high-refractive-index p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science China Physics, Mechanics and Astronomy
سال: 2013
ISSN: 1674-7348,1869-1927
DOI: 10.1007/s11433-013-5095-4