Single Phase Series Active Filter Load Compensation for Aircraft Applications

Compensation Strategies for Shunt Active Power Filter in Single- and Three-Phase Systems: Different Formulation, Comparison and Evaluation

compensation strategies for shunt active power filter in single- and three-phase systems: different formulation, comparison and evaluation

0

Single-Phase Shunt Active Power Filter Using Indirect Control Method

A single-phase shunt active power filter is used mainly for the elimination of harmonics in single-phase AC networks. In this paper a single-phase shunt active power filter based on, an indirect control technique is designed and simulated. This control technique is achieved by phase shifting the input signal(voltage/current) by π/2.The overall action of the shunt active power filter to eliminat...

Key Technologies of Active Power Filter for Aircraft: a Review

Article history: Received: 27.7.2015. Received in revised form: 4.11.2015. Accepted: 8.11.2015. Active Power Filter (APF) is not only an advanced technology to improve power quality and purify power system pollution but also a good approach to solve electrical problems of an advanced aircraft such as harmonic, reactive power and unbalanced load. However, there are still some specific problems f...

EMI Filter Design of a Three-Phase Buck-Type PWM Rectifier for Aircraft Applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out...