Single-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performance
نویسندگان
چکیده
منابع مشابه
On the Process-Related Rivet Microstructural Evolution, Material Flow and Mechanical Properties of Ti-6Al-4V/GFRP Friction-Riveted Joints
In the current work, process-related thermo-mechanical changes in the rivet microstructure, joint local and global mechanical properties, and their correlation with the rivet plastic deformation regime were investigated for Ti-6Al-4V (rivet) and glass-fiber-reinforced polyester (GF-P) friction-riveted joints of a single polymeric base plate. Joints displaying similar quasi-static mechanical per...
متن کاملFriction stir welding of accumulative roll bonded single phase brass
Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...
متن کاملFriction stir welding of accumulative roll bonded single phase brass
Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...
متن کاملMicrostructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
Dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. In this study, X53CrMnNiN219 (austenitic stainless steel) and X45CrSi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. The welded joint was then heat treated at 760 0C for 60 min. Mechanical prop...
متن کاملJoining of Cold-Reduced Carbon Steel Sheet and Aluminum Sheet by Impulsive Riveting Method and Punch Riveting Method
The impulsive riveting method is described as the punching and joining of sheet metal carried out using the impulsive energy of a weight accelerated by an air compressor. Parts are held together between the rivet and rivet-holder. A hole is made in the sheets by the high speed collision of rivet and a weight (approximately 100 m/s or more). Another method, punch riveting, joins the sheets by pr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Welding in the World
سال: 2019
ISSN: 0043-2288,1878-6669
DOI: 10.1007/s40194-019-00803-3