Single-crystal height extension by Laser Metal Deposition of CMSX-4
نویسندگان
چکیده
منابع مشابه
Layer-to-Layer Height Control for Laser Metal Deposition Processes
Reviewed, accepted September 10, 2008 A Laser Metal Deposition (LMD) height controller design methodology is presented in this paper. The height controller utilizes the Particle Swarm Optimization (PSO) algorithm to estimate model parameters between layers using measured temperature and track height profiles. The process model parameters for the next layer are then predicted using Exponentially...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولStructural study of epitaxial LiCoO2 films grown by pulsed laser deposition on single crystal SrTiO3 substrates
Article history: Received 11 December 2015 Received in revised form 4 May 2016 Accepted 11 May 2016 Available online 24 May 2016 Epitaxial LiCoO2 (LCO) thin films of different orientations were fabricated by pulsed laser deposition (PLD) in order to model single-crystal behavior of intercalation cathodes during electrochemical reactions. This paper demonstrates that (1) epitaxial growth of LCO ...
متن کاملDirect synthesis of single-walled carbon nanotubes bridging metal electrodes by laser-assisted chemical vapor deposition
Direct synthesis of single-walled carbon nanotubes SWNTs bridging prepatterned Mo electrodes has been achieved using laser-assisted chemical vapor deposition LCVD . The synthesized SWNTs are found predominantly semiconducting. By controlling the spot size of the focused laser beam, synthesis of SWNTs can be achieved in a localized manner, which is governed by the thermal and optical properties ...
متن کاملComponent repair using laser direct metal deposition
Recent studies have indicated that laser direct metal deposition can be used for repairing deep or internal cracks and defects in metallic components. In order to implement the method, it is necessary to machine a groove or slot to the depth of the defect and refill it. This work investigates advantages and potential problems with the technique and compares the results from using two different ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2020
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.09.057