Simultaneous wavelength and frequency encoded microstructure based quasi-distributed temperature sensor

Simultaneous wavelength and frequency encoded microstructure based quasi-distributed temperature sensor.

A novel microstructure based temperature sensor system using hybrid wavelength-division-multiplexing /frequency-division-multiplexing (WDM/FDM) is proposed. The sensing unit is a specially designed microstructure sensor both frequency and wavelength encoded, as well as low insertion loss which makes it have the potential to be densely multiplexed along one fiber. Moreover, the microstructure ca...

Reflectometry Based Quasi - distributed High Temperature Sensor

Corrosion Resistant FBG-Based Quasi-Distributed Sensor for Crude Oil Tank Dynamic Temperature Profile Monitoring

This article presents a corrosion resistant, maneuverable, and intrinsically safe fiber Bragg grating (FBG)-based temperature optical sensor. Temperature monitoring is a critical activity for the oil and gas industry. It typically involves acquiring the desired parameters in a hazardous and corrosive environment. The use of polytetrafluoroethylene (PTFE) was proposed as a means of simultaneousl...

Wavelength region selection and spectrophotometric simultaneous determination of naphthol isomers based on net analyte signal

Naphthol isomers were simultaneously and spectrophotometrically determined in wastewater, using a model based on net analyte signal (NAS). The calibration method used is a variation of the original hybrid linear analysis method as proposed by Goicoechea and Olivieri (HLA/GO). Owing to spectral interferences, the simultaneous determination of mixtures of naphthol isomers, using a spectrophotomet...

Intrinsic Fabry-Perot Interferometric Fiber Sensor Based on Ultra-Short Bragg Gratings for Quasi-Distributed Strain and Temperature Measurements

(Abstract) The health monitoring of smart structures in civil engineering is becoming more and more important as in-situ structural monitoring would greatly reduce structure life-cycle costs and improve reliability. The distributed strain and temperature sensing is highly desired in large structures where strain and temperature at over thousand points need to be measured simultaneously. It is d...