Simulation study of huff-n-puff air injection for enhanced oil recovery in shale oil reservoirs

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Enhanced Oil Recovery in Fractured Reservoirs

An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir

Core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating CO2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. The core samples were provided from a low permeability mixed wet oil reservoir at 156 °F and 1900 psia. In addition, very few studies of surfactant adsorption on car...

Integrating Embedded Discrete Fracture and Dual-Porosity, Dual-Permeability Methods to Simulate Fluid Flow in Shale Oil Reservoirs

Abstract: The oil recovery factor from shale oil remains low, about 5 to 7% of the oil in place. How to increase oil recovery from shale oil reservoirs is attracting more and more attention. CO2 huff-and-puff was historically considered one of the best approaches to improve the oil rate. Most previous simulation studies have been based on dual porosity, but simulation results from dual-porosity...

Simulation of Oil Reservoirs Driving Indices and Recovery Mechanisms

Different recovery mechanisms are activated during the production from reservoirs. Wells sometimes are kept with the injection. Therefore the evaluation of injection indices depended on material injection, seems to be necessary. This study is going to determine the drive indices for a reservoir by making a model using Eclipse. The model consists a gas cap and aquifer, in which there is an injec...