Simulation of temperature distribution and discharge crater of SiCp/Al composites in a single-pulsed arc discharge

نویسندگان

چکیده

SiCp/Al composites are difficult-to-cut materials. In recent years, electrical arc discharge machining has been developed to improve the machinability of these However, there is a big challenge build satisfactory heat transfer model in machining. This not only because material property difference between reinforcement and matrix but also micro-dimension SiC reinforcements. paper established new conduction simulation considering particle-Al interface phase change effects single-pulsed composites. A novel cell geometric was designed firstly. Then, temperature distribution at different depth from workpiece surface analyzed, influence sic volume fraction on field studied, contribution thermal resistance latent were explained. To demonstrate validity numerical model, comparisons verifications employed. Finally, method improving proposed mechanism materials discussed. It found that high prone concentrate layers especially when high, also, fluctuates respectively evaporation point aluminum SiC, SiC-Al less compared heat, etc. The this work improves accuracy observably previous will help acquire detailed removal

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Macroparticle Charging in a Pulsed Vacuum Arc Thruster Discharge

A pulsed vacuum arc discharge emits a plasma as well as macroparticles in the form of micron-sized molten droplets of cathode material. Due to their trajectory and size, these macroparticles often pose a contamination threat for both spacecraft-based thrusters, and thin film deposition systems. The charge of these macroparticles was experimentally measured, and compared to a model based on ther...

متن کامل

Nitric Oxide Generator Based on Pulsed Arc Discharge

Nitric oxide (NO) is increasingly being used in medical applications. Currently, a gas cylinder of N2 mixed with a high concentration of NO is used in the NO inhalation system. However, this arrangement is potentially risky due to the possibility of accidental leak of NO from the cylinder. The presence of NO in air leads to the formation of nitric dioxide (NO2), which is toxic to the lungs. The...

متن کامل

Temperature measurement of an atmospheric pressure arc discharge

The CN B 2 -X 2 + molecular emission spectrum is used to measure both the vibrational and rotational temperatures in atmospheric pressure arc jet discharges. The vibrational and rotational temperature effects on the synthetic diatomic molecular spectra were investigated from the v ,v = 0,0 band to the 5,5 band. The temperatures obtained from the synthetic spectra compared with the experimental ...

متن کامل

investigation of single-user and multi-user detection methods in mc-cdma systems and comparison of their performances

در این پایان نامه به بررسی روش های آشکارسازی در سیستم های mc-cdma می پردازیم. با توجه به ماهیت آشکارسازی در این سیستم ها، تکنیک های آشکارسازی را می توان به دو دسته ی اصلی تقسیم نمود: آشکارسازی سیگنال ارسالی یک کاربر مطلوب بدون در نظر گرفتن اطلاعاتی در مورد سایر کاربران تداخل کننده که از آن ها به عنوان آشکارساز های تک کاربره یاد می شود و همچنین آشکارسازی سیگنال ارسالی همه ی کاربران فعال موجود در...

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Chinese Journal of Aeronautics

سال: 2021

ISSN: ['1000-9361', '2588-9230']

DOI: https://doi.org/10.1016/j.cja.2020.05.033