Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive
نویسندگان
چکیده
منابع مشابه
The Fuzzy Finite Element Stress Analysis of Adhesive-Bonded Single Lap Joints
An adhesive-bonded single lap joint is analyzed using a new fuzzy finite element model. In the model, Young’s moduli and Poisson’s ratios of the joint materials are taken as fuzzy numbers in order to take the uncertainty of the material properties into account. The fuzzy numbers are modeled using linear triangular membership functions. At a selected material point in the adhesive layer, the pos...
متن کاملFatigue behaviour of composite adhesive lap joints
This paper is concerned with a fatigue study of composite adhesive lap joints produced from a bi-directional woven E-glass fibres and polypropylene. The adhesive used was a Bostik 7452 (Rubber & Plastics Grade) ethyl cyanoacrylate type. The effects of layer orientation, lap joint length and water immersion on the fatigue behaviour were studied. The specimens were immersed in water during period...
متن کاملSemi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملAnalysis of adhesive-bonded single-lap joint with an interfacial crack and a void
void within the adhesive. Depending upon the number of notches and voids, the specimen is divided into several regions. Assuming that a plane strain state of deformation prevails in the specimen, we write the balance of forces and moments for each section and impose the continuity of displacements, forces and moments at the interfaces between the adjoining sections. By taking the Laplace transf...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Adhesion and Adhesives
سال: 2010
ISSN: 0143-7496
DOI: 10.1016/j.ijadhadh.2009.12.002