Simulation of punching and post-punching shear behaviours of RC slab–column connections

Improving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets

This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...

Meniscal shear stress for punching.

AIM Experimental determination of the shear stress for punching meniscal tissue. METHODS Meniscectomy (surgical treatment of a lesion of one of the menisci) is the most frequently performed arthroscopic procedure. The performance of a meniscectomy is not optimal with the currently available instruments. To design new instruments, the punching force of meniscal tissue is an important parameter...

Strength of Footing with Punching Shear Preventers

The punching shear failure often governs the strength of the footing-to-column connection. The punching shear failure is an undesirable failure mode, since it results in a brittle failure of the footing. In this study, a new method to increase the strength and ductility of the footing was proposed by inserting the punching shear preventers (PSPs) into the footing. The validation and effectivene...

Evaluation of the Efficiency of Shear Studs for Punching Shear Resistance of Slab-Column Connections

Numerical Analysis of Punching Shear Failure of Reinforced Concrete Slabs

Nearly no load bearing behaviour of reinforced concrete members allows such varied interpretations and complex discussions as the shear behaviour. Especially the three-dimensional problem of the punching shear failure of reinforced concrete members is internationally discussed. Nevertheless up to now, there is no unified design approach or even an overall accepted design model. Especially for l...