Simulation of Palm Kernel Shell Gasification for Small Scale Power Generation Using Aspen Plus Software

Simulation of Biomass Gasification in Fluidized Bed Using Aspen Plus

Gasification is a thermo-chemical process to convert carbon-based compounds such as biomass and coal into a gaseous fuel. Among the various types of gasification methods, fluidized bed gasification is one which is considered as more efficient method than others as biomass is fluidized in a mixture of air/oxygen and steam. In the present study, a comprehensive steady state process model has been...

Small-Scale Gasification-Based Biomass Power Generation

Introduction Gasifying biomass to produce a combustible gas provides the possibility for much more efficient overall conversion of a given biomass resource into electric power than is possible with traditional combustion-based technologies. In particular, gasified biomass can be used to power internal combustion engines (ICEs), gas turbines, and fuel cells, all of which are able to produce elec...

investigation of pollutant generation by simulation of premixed gaseous combustion using aspen plus

Simulation and validation of chemical-looping combustion using ASPEN plus

Laboratory-scale experimental studies have demonstrated that Chemical-Looping Combustion (CLC) is an advanced technology which holds great potential for high-efficiency low-cost carbon capture. The generated syngas in CLC is subsequently oxidized to CO2 and H2O by reaction with an oxygen carrier. In this paper, process-level models of CLC are established in ASPEN Plus code for detailed simulati...

Simulation of Metal Chloride based Hydrogen Production using ASPEN PLUS

A new simulation model for Hydrogen production is developed on the Aspen Plus platform. Designing, Analysis and Optimization of the Metal Chloride based cyclic process is done thereby calculating the energy, exergy and overall efficiency of the same using the simulation software. Kinetic and thermodynamic analysis of chemical reactions occurring in each equipment of the proposed model is done. ...