Simulation of oxide phases formation under pulsed electron beam
نویسندگان
چکیده
منابع مشابه
Pulsed Electron-Beam Heating
A pulsed, 20 kv electron beam is focussed upon a vapor-deposited thermocouple, and the resulting temperature vs. time response is studied. The experimental data show much scatter, but are consistent with the theoretical prediction that the characteristic thermal response time T is proportional to d , where d is the beam diameter at the thermocouple. From these data, for the soft-glass substrate...
متن کاملModelling and simulation of beam formation in electron guns
This paper describes a new PC version of the software package GUN-EBT for computer simulation of beam formation in rotationally symmetric electron guns with thermionic cathodes. It is based on a self-consistent physical model which takes into account the beam space charge and the initial velocities effects. The theoretical framework used for both the formulation of the model and for the interpr...
متن کاملSpatiotemporal simulation of nickel oxide and carbon phases formation in solid oxide fuel cells (SOFC)
The formation of secondary phases in the porous electrodes is a severe mechanism affecting the lifetime of solid oxide fuel cells (SOFC). It can occur via various chemical mechanisms and it has a significant influence on cell performance due to pore clogging and deactivation of active surfaces and triple-phase boundary (TPB). We present a modeling and simulation study of nickel oxide formation ...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Pulsed Electron Beam Annealing of Arsenic-implantation Damage in Silicon
A SPIRE-300 pulsed electron beam processor has been used t o recrystallize (100) and (111) 15 Si wafers implanted with As (140 keV 10 cm-2). The machine parameters have been selected t o obtain an electron energy deposition profik convenient for melting of the silicon surface 2 down t o 1 J/cm . The best regrawth layer quality and As incorporation wereobtained with electron energy densities in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2016
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/124/1/012034