Simulation of Granular Organic Fertilizer Application by Centrifugal Spreader
نویسندگان
چکیده
There is no specialized equipment designed to spread granular cylindrical organic fertilizer in the soil. are also rational recommendations available on how this type of fertilizer. Mineral spreaders most often used for spreading granulated However, these fertilizers significantly different from mineral fertilizers. Due differences, unevenly, and does not reach required working width. Furthermore, rate accurate, crushed too much. The objective research develop a simulation model applications with centrifugal spreader EDEM (extended distinct element method) software. It possible numerical that corresponds real spreader, determine key physical–mechanical parameters application This can be evaluating transverse uniformity field (along trajectory normal machine). results show distance traveled by granules partially depends particle size, initial speed, spinning discs spreader.
منابع مشابه
1 Spatial Optimization of Fertilizer Application by a Centrifugal Spreader
Fertilization practice using centrifugal spreaders generally consists in the mass flow rate regulation thanks to the simple mathematical relation D=Q.L.V/600 where Q is the prescribed fertilization rate, L the working width and V the tractor speed. Modern machines equipped with DPAE device can thereby continuously control the mass flow rate with respect to the working width that is in most case...
متن کاملSpatial Optimization of Fertilizer Application by Centrifugal Spreading
We study an approach for the optimization of spreading performed by centrifugal spreaders in order to minimize environmental effects due to application errors. Faced with a large scale problem, we divide the domain of study into subdomains so that each tramline is individually dealt with. In order to take into account the mechanical limits of the device, some inequality constraints are introduc...
متن کاملHigh Speed Stereovision Setup for Position and Motion Estimation of Fertilizer Particles Leaving a Centrifugal Spreader
A 3D imaging technique using a high speed binocular stereovision system was developed in combination with corresponding image processing algorithms for accurate determination of the parameters of particles leaving the spinning disks of centrifugal fertilizer spreaders. Validation of the stereo-matching algorithm using a virtual 3D stereovision simulator indicated an error of less than 2 pixels ...
متن کاملA discrete element model for simulation of a spinning disc fertilizer spreader.
In this paper, a DEM (Discrete Element Method) model is presented and a series of computer experiments is analyzed and compared to experimental validations. Also, the simulations are compared to experimental results. The model uses a 3 parameter contact force to calculate impact between particles and other object such as vanes. The components of the contact forces are typically modeled in terms...
متن کاملOptimisation-based approach for a better centrifugal spreading
The use of centrifugal spreaders for application of granular fertilizers raises concern about application accuracy. These spreaders enable to distribute almost uniform deposits with regularly spaced parallel tramlines but lead over and under fertilizer application when distances separating the successive tractor trajectories are not constant or if paths are not parallel between them. The aim of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Agronomy
سال: 2021
ISSN: ['2156-3276', '0065-4663']
DOI: https://doi.org/10.3390/agronomy11020247