Simulation of gas kicks during oil well drilling
نویسندگان
چکیده
منابع مشابه
Two-phase Simulation of Well Control Methods for Gas Kicks in Case of Water and Oil-based Muds
Kick occurrence is a possible event during a drilling process. It is required to be handled immediately using a well control method to avoid blowout, financial losses and damages to the drilling crew. Several methods including driller, wait and weight, and concurrent are applicable in the drilling industry to control a well during a kick incident. In this study, typical well control methods wer...
متن کاملApplications of CBR in oil well drilling
This overview of different applications of CBR in petroleum engineering is based on a survey and comparative evaluation of different successful applications of CBR. The number of papers and research groups is indicative of importance, need, and growth of CBR in different industries. Application-oriented research in the area of case based reasoning has moved mature research results into practica...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Thermal simulation of two-phase flow in under-balanced drilling operation with oil and gas production
The accurate prediction of wellbore temperature distribution helps to accurately estimate well pressure profile and bottom-hole pressure (BHP) which is important in the under-balanced drilling (UBD) operation. In this paper effect of temperature variation due to heat transfer of drilling fluid with the formation and also oil and gas production from the reservoir into the annulus in under-balanc...
متن کاملA Comparison of Geothermal with Oil and Gas Well Drilling Costs
The costs associated with drilling and completing wells are a major factor in determining the economic feasibility of producing energy from geothermal resources. In EGS power plants, estimates place drilling costs as accounting for 42%-95% of total power plant costs (Tester et al., 1994) depending on the quality of the EGS reservoir. An earlier correlation first developed by Milora and Tester (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modeling, Identification and Control: A Norwegian Research Bulletin
سال: 1989
ISSN: 0332-7353,1890-1328
DOI: 10.4173/mic.1989.4.3