Simulation of Fouling Behaviors in Dead-End Filtration of Particulate Suspensions

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Filtration and Particulate Fouling in Membrane Distillation

Fouling and scaling in membrane distillation (MD) is one of the significant barriers to its continued growth. Fouling in MD blocks the pores, causing a decline in permeate flux, and may eventually lead to wetting of a hydrophobic membrane by the saline feed, contaminating the permeate. Many previous studies on MD have observed that while MD is more fouling resistant than reverse osmosis (RO), i...

متن کامل

Investigation of purge time in cathodic dead-end mode PEMFC

 Recently, special type of fuel cells has been developed that operates in a Dead End mode. Working in this condition, the Dead-End fuel cell is supplied withhydrogen almost at the same rate of consumption. It is noteworthy to mention thatall of the water transport mechanisms have been considered in this simulation.Water accumulation that is directly proportional to the cell current is of a grea...

متن کامل

CFD Simulation of Soot Filtration in Diesel Particulate Filters

Soot emissions from automotive applications can be reduced through on-board diesel particulate filters (DPFs): the filter gets progressively loaded by filtering the soot laden flue gases, thus causing an increasing pressure drop, until an oxidative regeneration is induced by temperature rise. Due to the complexity of the involved phenomena, a fully predictive and detailed mathematical model rep...

متن کامل

DESIGN AND TESTING OF AN EXPERIMENT TO MEASURE SELF-FILTRATION IN PARTICULATE SUSPENSIONS by Mattias

An experiment for measuring self-filtration in terms of change in volume fraction downstream of a constriction compared to volume fraction upstream of said constriction was designed and tested. The user has the ability to control a variety of parameters including constriction geometry, flow rate, and initial volume fraction in order to evaluate their impact on downstream volume fraction. The re...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: MEMBRANE

سال: 2008

ISSN: 0385-1036,1884-6440

DOI: 10.5360/membrane.33.254