Simulation of Contaminates Around the Solid Immersion Lens in a Near-Field Optical Recording System
نویسندگان
چکیده
منابع مشابه
Near-field infrared imaging with a microfabricated solid immersion lens
We report imaging in the infrared with a microfabricated solid immersion lens. The integrated 15-mm-diameter lens and cantilever are fabricated from single-crystal silicon and scanned in contact with a sample to obtain an image. We demonstrate a focused spot size of l/5 and an effective numerical aperture of 2.5 with l59.3 mm light. The total power transmitted through the lens is a factor of 10...
متن کاملAdvanced optical characterization of micro solid immersion lens
We report on the advanced optical characterizations of microfabricated solid immersion lenses with 2-μm diameter, operating at λ = 642 nm. The main feature, the spot size reduction, has been investigated by applying a focused Gaussian beam of NA = 0.9. Particular illuminating beams, e.g., Bessel-Gauss beams of the zeroth and the first order, a doughnutshape beam and its decompositions, i.e. two...
متن کاملSubwavelength-size solid immersion lens.
We report on the fabrication and characterization of nanoscale solid immersion lenses (nano-SILs) with sizes down to a subwavelength range. Submicrometer-scale cylinders fabricated by electron-beam lithography are thermally reflowed to form a spherical shape. Subsequent soft lithography leads to nano-SILs on transparent substrates for optical characterization. The optical characterization is pe...
متن کاملHigher Resolution Microscopy System Based on Aplanatic Solid Immersion Lens
The solid immersion lens (SIL), invented by Mansfield and Kino in 1990 [1], attracts potential application in the field of imaging solid state devices, where the structures are buried deep into the substrate such as in integrated circuits. This is due to the ability of SIL to provide sub-surface imaging with better resolution than a conventional microscopy system. Many papers have dealt with th...
متن کاملSub-surface Microscopy System Based on Solid Immersion Lens
The general model of a microscopy system is composed of three components: focusing of incident light, interaction of the incident light with the sample, and imaging of the scattered light. Although each component of a microscopy system influences the resolution of the microscopy system, only a few papers have reported a general model of a microscopy system in the literature. Such a model of a m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Magnetics
سال: 2007
ISSN: 0018-9464
DOI: 10.1109/tmag.2006.888697