Simulation of Active Eye Motion Using Finite Element Modelling

Analysis of Roll Wear in Reshaping Using Finite Element Simulation

Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...

Flexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling

The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...

Modelling and Simulation of Metal Cutting by Finite Element Method

analysis of the dynamical behavior of the delay mechanism in a projectile motion controller, using 3d finite element simulation

in this paper, dynamical behavior of the delay mechanism of a special projectile controller is studied, using 3d finite element simulation. the controller considered here is among of high-acceleration mechanical controllers. due to high linear and angular accelerations of the projectile and also explosion risk, experimental investigation is very limited and almost impossible. so, numerical simu...

Finite Element Modelling Approach in Active Structural Acoustic Control