Simulation and finite element analysis of continuous multi-pass hot rolled AZ31B magnesium alloy sheets
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation of Hot Continuous Rolling of 37Mn5 Tube Billet and Roll Pass Optimization
In order to optimize the continuous rolling schedule for improving the quality of rolled tube billet, three dimensional thermal mechanical coupled finite element simulation is applied to analyse the multi-pass continuous rolling process of Ф100mm 37Mn5 steel tube billet from 200mm×200mm square cast bloom. Due to the larger plastic strain occurring at the corner area of the billet, the bias mesh...
متن کاملInfluence of an Inclusion on Multi-Pass Copper Shaped-Wire Drawing by 2D Finite Element Analysis
The size and length effects of an inclusion on multi-pass copper shaped-wire drawing were investigated. For this purpose, an experimental investigation on optimal die half-angle was conducted. Based on experimental data of optimal die half-angle, wire and inclusion deformations, drawing and hydrostatic stress of copper shaped-wires that contain an inclusion were calculated by two-dimensional fi...
متن کاملConstitutive Modelling of AZ31B-O Magnesium Alloy for Cryogenic Machining
The success of a FE model for metal cutting process is strongly dependent on the accurate characterization of the workpiece material, under similar conditions as those found in metal cutting. In this paper, dynamic shear tests using a Gleeble machine have been performed on 4 mm thickness disks of AZ31B-O magnesium alloy, using a special designed tool. In order to include the effects of the cryo...
متن کاملAnalysis of Roll Wear in Reshaping Using Finite Element Simulation
Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...
متن کاملSimulation of Plastic Deformation Behavior of Ti-6Al-4V Alloy by Finite Element Method
Mechanical properties of alloys have a strong relation with microstructure and determination of their behavior can lead to multiple advantages. To obtain this goal, finite element method )FEM( is one of the best ways. In this study a series of experiments were carried out on the produced Ti-6Al-4V to obtain its mechanical characteristics and to prepare it for photographing in micro dimensions. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallic Materials
سال: 2012
ISSN: 0023-432X
DOI: 10.4149/km_2012_1_43