Simulation and fabrication of 0–3 composite PZT films for ultrahigh frequency (100–300 MHz) ultrasonic transducers

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Ultrahigh Frequency (100 MHz–300 MHz) Ultrasonic Transducers for Optical Resolution Medical Imagining

High resolution ultrasonic imaging requires high frequency wide band ultrasonic transducers, which produce short pulses and highly focused beam. However, currently the frequency of ultrasonic transducers is limited to below 100 MHz, mainly because of the challenge in precise control of fabrication parameters. This paper reports the design, fabrication, and characterization of sensitive broadban...

متن کامل

Fabrication and characterization of annular-array, high-frequency, ultrasonic transducers based on PZT thick film

In this work, low temperature deposition of ceramics, in combination with micromachining techniques have been used to fabricate a kerfed, annular–array, high–frequency, micro ultrasonic transducer (with seven elements). This transducer was based on PZT thick film and operated in thickness mode. The 27 μm thick PZT film was fabricated using a low temperature (720 oC) composite sol-gel ceramic (s...

متن کامل

Fabrication of High Frequency (25–75 MHz) Single Element Ultrasonic Transducers

The design and fabrication of high frequency single element ultrasonic transducers present a multitude of challenges for the transducer engineer, from size constraints to electrical impedance matching. This paper discusses the trade-offs involved in procedures used to fabricate lithium niobate (LiNbO3) and lead titanate (PbTiO3) transducers in the 25MHz to 75MHz range. Transducers of varying di...

متن کامل

Fabrication of Flexible Piezoelectric PZT/Fabric Composite

Flexible piezoelectric PZT/fabric composite material is pliable and tough in nature which is in a lack of traditional PZT patches. It has great application prospect in improving the sensitivity of sensor/actuator made by piezoelectric materials especially when they are used for curved surfaces or complicated conditions. In this paper, glass fiber cloth was adopted as carrier to grow PZT piezoel...

متن کامل

Modelling of a novel high-impedance matching layer for high frequency (>30 MHz) ultrasonic transducers.

This work describes a new approach to impedance matching for ultrasonic transducers. A single matching layer with high acoustic impedance of 16 MRayls is demonstrated to show a bandwidth of around 70%, compared with conventional single matching layer designs of around 50%. Although as a consequence of this improvement in bandwidth, there is a loss in sensitivity, this is found to be similar to ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Applied Physics

سال: 2016

ISSN: 0021-8979,1089-7550

DOI: 10.1063/1.4942857