Simulation Analysis of Adsorption of Indoor Pollutants by Modified Activated Carbon
نویسندگان
چکیده
منابع مشابه
Adsorption Studies of Organic Pollutants onto Activated Carbon
ABSTRACT: Activated carbon was developed from coconut shell, characterized and used for the removal of Rhodamine-B from wastewater successfully. The methylene blue number, iodine number and BET surface area of the prepared carbon were found to be 80 mg g, 600 mg g, and 1200 m g respectively. Rhodamine B is one of the water soluble, basic red cationic xanthene class dyes, a common water tracer f...
متن کاملActivated Carbon Modified with Copper for Adsorption of Propanethiol
Activated carbons were characterized texturally and chemically before and after treatment, using surface area determination in the BET model, Boehm titration, TPR, DRX and immersion calorimetry. The adsorption capacity and the kinetics of sulphur compound removal were determined by gas chromatography. It was established that the propanethiol retention capacity is dependent on the number of oxyg...
متن کاملAdsorption of methyl mercaptan on surface modified activated carbon.
The influence of surface modification of activated carbon on the adsorption of methyl mercaptan in N(2) was investigated. The modification of the activated carbon was carried out by treatment with HNO(3)/H(2)SO(4) solutions, heat-treatment in Ar, and adsorption of cetylamine. Acid-treatment increased the adsorption of methyl mercaptan compared with the original activated carbon, and the adsorbe...
متن کاملEnhanced adsorption of quaternary amine using modified activated carbon.
This study examined different methodologies to modify activated carbon (AC) for the removal of quaternary amine, tetramethylammonium hydroxide (TMAH), from water. Commercial carbon (WAC) was treated by nitric acid oxidation (NA-WAC), silica impregnation (SM-WAC0.5), and oxygen plasma (P10-WAC), and their characteristics and adsorption capacity were compared. The Langmuir model fitted the equili...
متن کاملExperimental Investigation and Modeling of CO2 Adsorption Using Modified Activated Carbon
In this research, Activated Carbon (AC) was modified using a sodium hydroxide solution for CO2 adsorption. Adsorption experiments were carried out in a batch reactor at a temperature range of 20-80°C and a pressure range of 2-10 bars to investigate kinetic, isotherm, and thermodynamic of the CO2 adsorption process. Activated carbon was modified with NaOH solution conce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S Web of Conferences
سال: 2020
ISSN: 2267-1242
DOI: 10.1051/e3sconf/202014302004