Simulation Analysis in Gear Meshing Process Based on ANSYS Software

Statics Analysis of Cylindrical Gear Drive at Any Meshing Position Based on Ansys

The transform relation between the meshing position and rotation angle of a cylindrical gear pair is firstly derived according to the theory of gear meshing. Then the technique of building the assembly model of a cylindrical gear pair at specified meshing position in ANSYS is researched. On this basis, a new method to perform static contact analysis of cylindrical gear at any meshing location i...

Meshing Error of elliptic cylinder gear based on tooth contact analysis

In order to study the dynamic meshing characteristics of the elliptic cylinder gear and obtain the meshing error of the gear transmission system, the two-dimensional static contact analysis of the gear tooth surface is carried out by using ANSYS software, and the key parts of the contact area of the tooth surface are determined. Then, the dynamic meshing model of the elliptic cylinder gear is e...

Dynamic Meshing Characteristics of Elliptic Cylinder Gear Based on Tooth Contact Analysis

As the most important working area of gear, teeth play the role of transmitting load and power. Tooth line and tooth profile are the two main characteristics of the tooth surface, which affect the shape of the tooth surface, tooth meshing characteristics and contact characteristics. Taking the elliptical cylinder gear pair in the reversing device of a new type of drum pumping unit as the resear...

ANSYS Modeling and Meshing Guide

Research on Tooth Modification of Spur Bevel Gear

Isometric modification is proposed as a new method of axial modification of spur bevel gear. Based on the gear geometry theory and the normal meshing motion equation of gear pairs, changes of meshing points and angles are analyzed and the effect of axial modification on meshing movement of gear pairs is discussed. After that, a method of drawing spherical involute with the aid of SolidWorks sof...