Simulating eddy current sensor outputs for blade tip timing
نویسندگان
چکیده
منابع مشابه
A Blade Tip Timing Method Based on a Microwave Sensor
Blade tip timing is an effective method for blade vibration measurements in turbomachinery. This method is increasing in popularity because it is non-intrusive and has several advantages over the conventional strain gauge method. Different kinds of sensors have been developed for blade tip timing, including optical, eddy current and capacitance sensors. However, these sensors are unsuitable in ...
متن کاملA Non-Uniformly Under-Sampled Blade Tip-Timing Signal Reconstruction Method for Blade Vibration Monitoring
High-speed blades are often prone to fatigue due to severe blade vibrations. In particular, synchronous vibrations can cause irreversible damages to the blade. Blade tip-timing methods (BTT) have become a promising way to monitor blade vibrations. However, synchronous vibrations are unsuitably monitored by uniform BTT sampling. Therefore, non-equally mounted probes have been used, which will re...
متن کاملBlade Tip Clearance and Blade Vibration Measurements Using a Magnetoresistive Sensor
A Blade Tip Timing (BTT) system enables the measurement of turbomachinery blade vibrations by means of contactless sensors mounted in the casing. In addition, the so-called Blade Tip Clearance (BTC) measurement system ensures the monitoring of the existing running gaps between the blade tip and the casing. This paper focuses on the results achieved so far using a novel magnetoresistive sensor f...
متن کاملSparse Representation Based Frequency Detection and Uncertainty Reduction in Blade Tip Timing Measurement for Multi-Mode Blade Vibration Monitoring
The accurate monitoring of blade vibration under operating conditions is essential in turbo-machinery testing. Blade tip timing (BTT) is a promising non-contact technique for the measurement of blade vibrations. However, the BTT sampling data are inherently under-sampled and contaminated with several measurement uncertainties. How to recover frequency spectra of blade vibrations though processi...
متن کاملAn Optical Fiber Bundle Sensor for Tip Clearance and Tip Timing Measurements in a Turbine Rig
When it comes to measuring blade-tip clearance or blade-tip timing in turbines, reflective intensity-modulated optical fiber sensors overcome several traditional limitations of capacitive, inductive or discharging probe sensors. This paper presents the signals and results corresponding to the third stage of a multistage turbine rig, obtained from a transonic wind-tunnel test. The probe is based...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Mechanical Engineering
سال: 2018
ISSN: 1687-8140,1687-8140
DOI: 10.1177/1687814017748020