Simulated Performance of Cross-Laminated Timber Residential Structures Subject to Tornadoes

A Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China

This paper aims to investigate the energy saving and carbon reduction performance of cross-laminated timber residential buildings in the severe cold region of China through a computational simulation approach. The authors selected Harbin as the simulation environment, designed reference residential buildings with different storeys which were constructed using reinforced concrete (RC) and cross-...

Ambient vibration tests of a cross-laminated timber building

Energy Saving and Carbon Reduction in the Operation Stage of Cross Laminated Timber Residential Buildings in China

This paper focused on energy consumption and carbon emission for heating and cooling during a building’s operation stage, and examined the energy effects of using Cross Laminated Timber (CLT) as an alternative building material to reinforced concrete (RC) in China’s 31 key cities located in different climate zones. The authors designed two seven-story residential buildings, which were construct...

Structural Tests of Concrete Composite - Cross - Laminated Timber Floors Final Report

Experimental tests of a composite concrete-cross-laminated timber (CLT) floor system were conducted. The floor system was constructed with 5-ply CLT panels (6.75 in. thick) made composite with a 2.25 in. thick reinforced concrete topping slab. Four series of tests were performed using different specimen configurations and laboratory testing methods. Tests included: (1) Comparative one-way bendi...

Bending Properties of Cross Laminated Timber (CLT) with a 45° Alternating Layer Configuration

Bending tests were conducted with cross laminated timber (CLT) panels made using an alternating layer arrangement. Boards of Norway spruce were used to manufacture five-layer panels on an industrial CLT production line. In total, 20 samples were tested, consisting of two CLT configurations with 10 samples of each type: transverse layers at 45° and the conventional 90° arrangement. Sample dimens...