Simple, Broadband Material Characterization Using Dual-Ridged Waveguide to Rectangular Waveguide Transitions
نویسندگان
چکیده
منابع مشابه
Broadband Rectangular Waveguide to GCPW Transition
A broadband transition design between rectangular waveguide and GCPW is proposed and studied. The E-field of GCPW is designed to be gradually changed to that of waveguide via the simple tapered probes and metallic vias. The planar circuit of the transition is fabricated by low cost standard PCB process. The tolerance analysis for this transition is also given. A back-to-back transition prototyp...
متن کاملHalf Wavelength Double-ridged Half Height Rectangular Waveguide Resonator
This paper presents a novel concept of half wavelength doubleridged half height rectangular waveguide resonator. The basic design consists of a double-ridged rectangular waveguide placed between two rectangular waveguide WR2300. The resonance frequency, bandwidth, Q factor etc. can be controlled by varying the ridge parameters such as ridge length, width, height, ridge gap width, ridge gap heig...
متن کاملRectangular Waveguide to Coax Transition Design
question I am frequently asked is, “Why do the antenna dimensions in the W1GHZ Microwave Antenna Book — Online not include the probe dimensions (for the transition from waveguide to coaxial transmission line)?” The answer is that the transition is part of the transmission line, not the antenna, and does not directly affect the performance of an antenna. The transition may be right at the antenn...
متن کاملA Broadband CPW-to-Waveguide Transition Using Quasi-Yagi Antenna
A novel CPW-to-waveguide transition utilizing a uniplanar quasi-Yagi antenna is presented. The X-band back-to-back transition demonstrates 33% bandwidth with return loss better than -10dB. This transition should find a wide variety of applications due to its high MIC/MMIC compatibility and low cost.
متن کاملA Broadband Waveguide Thermal Isolator
This paper describes a new, compact, waveguide thermal isolator. The isolator is based on a recently developed microwave bandgap joint, a periodic structure which suppresses microwave fields propagating between two parallel conducting surfaces. When such a structure is placed between a pair of waveguide flanges, the flanges can be separated by a few percent of a wavelength before the leakage an...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Electromagnetic Compatibility
سال: 2014
ISSN: 0018-9375,1558-187X
DOI: 10.1109/temc.2013.2274898