Silver DopedTiO2Nanostructure Composite Photocatalyst Film Synthesized by Sol-Gel Spin and Dip Coating Technique on Glass
نویسندگان
چکیده
منابع مشابه
Tin-doped indium oxide thin films deposited by sol–gel dip-coating technique
Indium tin oxide (ITO) thin films were prepared by the sol–gel dip-coating (SGDC) technique. The microstructure and electrical properties of ITO thin films crystallized using rapid thermal annealing (RTA) were compared with those of films prepared by classic thermal annealing (CTA). ITO thin films were successfully prepared by CTA at 500 jC for 30–60 min. At the same temperature of 500 jC and w...
متن کاملEffects of Cobalt Doping on Optical Properties of ZnO Thin Films Deposited by Sol–Gel Spin Coating Technique
Cobalt (Co) doped Zinc Oxide (ZnO) thin films, containing different amountof Cobalt nanoparticles as the Co doping source, deposited by the sol–gel spin coatingmethod onto glass via annealing temperature at 400˚C, have been investigated by opticalcharacterization method. The effect of Co incorporation on the surface morphology wasclearly observed from scanning electron microscopy (SEM) images. ...
متن کاملSol-gel spin coating derived ZnO thin film to sense the acetic acid vapor
ZnO thin film of 80 nm thickness was deposited by the sol-gel spin coating method on SiO2/Si substrate and subsequently post-annealed at 500°C with a flow of oxygen for 60 min. Crystallographic structure of the sample was characterized by X-ray diffraction (XRD) method while a field emission scanning electron microscope (FESEM) was used to investigate the surface physical morphology ...
متن کاملSol-gel spin coating derived ZnO thin film to sense the acetic acid vapor
ZnO thin film of 80 nm thickness was deposited by the sol-gel spin coating method on SiO2/Si substrate and subsequently post-annealed at 500°C with a flow of oxygen for 60 min. Crystallographic structure of the sample was characterized by X-ray diffraction (XRD) method while a field emission scanning electron microscope (FESEM) was used to investigate the surface physical morphology ...
متن کاملGlass coating for PDMS microfluidic channels by sol-gel methods.
Soft lithography using polydimethylsiloxane (PDMS) allows one to fabricate complex microfluidic devices easily and at low cost. However, PDMS swells in the presence of many organic solvents significantly degrading the performance of the device. We present a method to coat PDMS channels with a glass-like layer using sol-gel chemistry. This coating greatly increases chemical resistance of the cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Photoenergy
سال: 2008
ISSN: 1110-662X,1687-529X
DOI: 10.1155/2008/628713