Silicon Nitride Whisker-Reinforced Aluminum Matrix Composites: Twinning and Precipitation Behavior
نویسندگان
چکیده
منابع مشابه
Fatigue crack growth resistance in SiC particulate and whisker reinforced P/M 2124 aluminum matrix composites
Fatigue crack growth is examined in P/M 2124 aluminum alloys reinforced with SiC particles (SiCp) and whiskers (SiCw) over a wide spectrum of growth rates from 10 to 10 m per cycle. Effects of aging treatment, orientation of crack growth direction with respect to the rolling direction, mean stress (or stress ratio), and reinforcement volume percent on the fatigue crack growth threshold are inve...
متن کاملMechanical and Tribological Behavior of Aluminum Alloy LM13 Reinforced with Titanium Dioxide Metal Matrix Composites
In the present research work physical, mechanical and tribological behavior of Aluminum (Al) alloy LM13 reinforced with Nano-sized Titanium Dioxide (TiO2) particulates were fabricated, mechanical and tribological properties were investigated. The amount of nano TiO2 particulates in the composite was added from 0.5% to 2% in 0.5 weight percent (wt %) increments. The Al-LM13-TiO2 Metal Matrix Com...
متن کاملPreparation and characterization of carbon nanotube reinforced silicon nitride composites
Multiwall carbon nanotube (MWNT) reinforced silicon nitride ceramics matrix composites have been prepared. The hot isostatic press (HIP)-sintering method was used for composite processing. Bending strength and elastic modulus of MWNT-silicon nitride composites showed a considerable improvement compared to matrices with added carbon fiber, carbon black or graphite. However, the silicon nitride s...
متن کاملMechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review
Aluminum Metal Matrix Composites (MMCs) sought over other conventional materials in the field of aerospace, automotive and marine applications owing to their excellent improved properties. These materials are of much interest to the researchers from few decades. These composites initially replaced Cast Iron and Bronze alloys but owing to their poor wear and seizure resistance, they were subject...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2020
ISSN: 2075-4701
DOI: 10.3390/met10030420