Silicon MEMS Thermocatalytic Gas Sensor in Miniature Surface Mounted Device Form
نویسندگان
چکیده
A reduced size thermocatalytic gas sensor was developed for the detection of methane over 20% explosive concentration. The chip is formed from two membranes with a 150 µm diameter heated area in their centers and covered highly dispersed nano-sized catalyst inert reference, respectively. power dissipation well below 70 mW at 530 °C maximum operation temperature. mounted novel surface metal-ceramic package form-factor SOT-89. sensitivity device 10 mV/v%, whereas response recovery times without additional carbon filter are <500 ms <2 s, tests have shown reliability new design concerning hotplate stability massive encapsulation, but high degradation rate coupled its modest chemical limits use only pulsed mode operation. optimized reduces average consumption 2 mW.
منابع مشابه
Peizoresistive Mems Cantilever based Co2 Gas Sensor
A study about the piezoresistive Micro-Electro-Mechanical Systems (MEMS) cantilever for a chemical sensitive mass based sensor has been carried out to enhance sensor sensitivity. The sensitive region attracts the CO2 molecules there by introducing the stress concentration region (SCR). Three types of SCR geometry designs were first analysed using Intellisuite software to study the effect of str...
متن کاملPeizoresistive MEMS Cantilever based CO2 Gas Sensor
A study about the piezoresistive Micro-Electro-Mechanical Systems (MEMS) cantilever for a chemical sensitive mass based sensor has been carried out to enhance sensor sensitivity. The sensitive region attracts the CO2 molecules there by introducing the stress concentration region (SCR). Three types of SCR geometry designs were first analysed using Intellisuite software to study the effect of str...
متن کاملA Surface Micromachined CMOS MEMS Humidity Sensor
This paper reports a CMOS MEMS (complementary metal oxide semiconductor micro electromechanical system) piezoresistive humidity sensor fabricated by a surface micromachining process. Both pre-CMOS and post-CMOS technologies were used to fabricate the piezoresistive humidity sensor. Compared with a bulk micromachined humidity sensor, the machining precision and the sizes of the surface micromach...
متن کاملMiniature gas sensing device based on near-infrared spectroscopy
The identification and quantification of atoms, molecules, or ions concentrations in gaseous samples are in great demand for medical, environmental, industrial, law enforcement and national security applications. These applications require in situ, highresolution, non-destructive, sensitive, miniature, inexpensive, rapid detection, remotely accessed, real time and continuously operating chemica...
متن کاملNew Design of Mems piezoresistive pressure sensor
The electromechanical analysis of a piezoresistive pressure microsensor with a square-shaped diaphragm for low-pressure biomedical applications is presented. This analysis is developed through a novel model and a finite element method (FEM) model. A microsensor with a diaphragm 1000 „m length and with thickness=400 µm is studied. The electric response of this microsensor is obtained with applyi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Chemosensors
سال: 2021
ISSN: ['2227-9040']
DOI: https://doi.org/10.3390/chemosensors9120340