SiC-IrSi3 for High Oxidation Resistance
نویسندگان
چکیده
منابع مشابه
THE OXIDATION RESISTANCE OF HIGH ALUMINUM HEAT RESISTANT STEELS
Abstract: In this research, the oxidation behaviour of high Aluminum heat resistant steel (%25Cr,%20Ni,%8Al) hasbeen evaluated at the temperature range of (1000-1300ºC).The results showed that there was no countinous healinglayer on the surface of the alloy when Al increased up to %5.5 and the oxidation resistance of steel decreased due toformation of spinel oxides on the surface.By increasing ...
متن کاملHigh Thermal Conductivity SiC/SiC Composites for Fusion Applications
SiC-SiC composites offer excellent potential for fusion energy as well as numerous commercial applications. High manufacturing cost and very low through-the-thickness (transverse) thermal conductivity (below 15 W/mK) hinders wider applications of SiC/SiC composites. To overcome these obstacles, a low-cost, Chemical Vapor Reaction (CVR) process was developed to fabricate crystalline, high purity...
متن کاملHigh Q SiC microresonators.
We demonstrate photonic devices based on standard 3C SiC epitaxially grown on silicon. We achieve high optical confinement by taking advantage of the high stiffness of SiC and undercutting the underlying silicon substrate. We demonstrate a 20 μm radius suspended microring resonator with Q=14,100 fabricated on commercially available SiC-on-silicon substrates.
متن کاملImprove oxidation resistance at high temperature by nanocrystalline surface layer
An interesting change of scale sequence occurred during oxidation of nanocrystalline surface layer by means of a surface mechanical attrition treatment. The three-layer oxide structure from the surface towards the matrix is Fe3O4, spinel FeCr2O4 and corundum (Fe,Cr)2O3, which is different from the typical two-layer scale consisted of an Fe3O4 outer layer and an FeCr2O4 inner layer in convention...
متن کاملSiC High Blocking Voltage Transistor
Recently, energy saving is strongly required to prevent global warming. Electricity is the most common energy form and is necessary in our daily life and various activities, because it is comparatively easy to utilize in transmission and conversion after generation. Therefore, it is very important to reduce energy loss in electric power systems and improve their efficiency. The present power sy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma13010098