Shrinkage Measurements of UV-Curable Adhesives
نویسندگان
چکیده
منابع مشابه
UV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملRheological Studies of UV - curable Materials
The challenge for studying fast changing systems with rheology such as UV initiated polymerization and crosslinking is multifold. These materials react within seconds and the moduli change over 2 to 3 decades. UV light must irradiate the sample homogeneously over a short time period and fast data acquisition is required to capture the modulus change during the reaction. An option for UV curing,...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملLow shrinkage light curable nanocomposite for dental restorative material.
OBJECTIVES The aim of this study was to develop a low shrinkage visible light curable nanocomposite dental restorative material without sacrificing the other properties of conventional materials. This nanocomposite was developed by using an epoxy resin 3,4-epoxycyclohexylmethyl-(3,4-epoxy)cyclohexane carboxylate (ERL4221) matrix with 55% wt of 70-100 nm nanosilica fillers through ring-opening p...
متن کاملPreparation and Properties of UV curable urethane methacrylate oligomer
N,N-dihydroxyethyl methylacrylamide (DHEMAA), which is a methacrylate modified by diol, has been prepared by reaction of diethylanol amine with methyl methacrylate. UV curable urethane methacrylate oligomers have been synthesized by the reaction of a series of diol, triol, DHEMAA and HEMA with TDI or IPDI in two reaction orders. The first reaction style is the TDI or IPDI reacted with HEMA firs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optik & Photonik
سال: 2017
ISSN: 1863-1460
DOI: 10.1002/opph.201700026