SHEAR STRENGTH OF RC DEEP BEAM PANELS – A REVIEW
نویسندگان
چکیده
منابع مشابه
a simple strut-and-tie model for prediction of ultimate shear strength of rc deep beams
in this paper a new method based on strut-and-tie model (stm) is proposed to determine the shear capacity of simply supported rc deep beams and an efficiency factor for concrete with considering the effect of web reinforcements. it is assumed that, the total carried shear force by rc deep beam provided by two independent resistance, namely diagonal concrete strut due to strut-and-tie mechanism ...
متن کاملShear Strength of Exterior Plywood Panels Pressed at Low Temperature
Plywood manufactured from thin veneer sheets of different species is one of the most traditional structural composite panels. The objective of this study was to produce experimental plywood panels using a temperature of 100 °C, which is 10 to 30% lower than typical press temperature of plywood manufacture. It was determined that shear strength characteristics of the samples were not adversely i...
متن کاملStrut-and-Tie Method for Prediction of Ultimate Shear Capacity of Shear-Strengthened RC deep beams with FRP
The main objective of this study is to propose the Strut-and-Tie method (STM) to predict the shear capacity of simply supported RC deep beams shear-strengthened with carbon fiber reinforced polymers (CFRP). It is assumed that, the total carried shear force by shear-strengthened RC deep beam provided by three independent resistance, namely diagonal concrete strut due to Strut-and-tie mechanism, ...
متن کاملAn Experimental Study on Shear Strengthening of RC Lightweight Deep Beams Using CFRP
. This paper presents the results of an experimental investigation on shear strength enhancement of reinforced concrete deep beams externally reinforced with fiber reinforced polymer (FRP) composites. A total of six deep beam specimens of two different classes, as-built (unstrengthened) and retrofitted were tested in the experimental evaluation program. Two composite systems namely carbon/epoxy...
متن کاملImproving the Punching Shear Strength of RC Slabs by FRP and Steel Sheets
This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2014
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2014.0328015