Shear Behaviors of RC Beams Externally Strengthened with Engineered Cementitious Composite Layers
نویسندگان
چکیده
منابع مشابه
Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites
Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...
متن کاملDebonding Failures of Rc Beams Strengthened with Externally Bonded Frp Reinforcement: Behaviour and Modelling
Both the flexural and shear strengths of reinforced concrete (RC) beams can be substantially enhanced using externally bonded fibre reinforced polymer (FRP) composites. Failures of such FRP-strengthened RC beams often occur by debonding of the FRP plate from the RC beam in a number of forms. Despite numerous theoretical and experimental studies on debonding failures of FRP-strengthened RC beams...
متن کامل3D FE Analysis of RC Beams Externally Strengthened with SRG/SRP Systems
The purpose of this study is to evaluate, through a nonlinear Finite Element (FE) analysis, the structural behavior of Reinforced Concrete (RC) beams externally strengthened by using Steel Reinforced Grout (SRG) and Steel Reinforced Polymer (SRP) systems. The parameters taken into account were the external strengthening configuration, with or without U-wrap end anchorages, as well as the streng...
متن کاملStructural behaviour of RC beams externally strengthened with FRP sheets under fatigue and monotonic loading
This paper presents experimental research on the fatigue and post-fatigue static behaviour of reinforced concrete beams strengthened with glass or carbon fibre reinforced polymer (FRP) sheets placed either vertically or obliquely. All beams for fatigue tests were subjected to four-point bending for one million cycles with a frequency of 5 Hz. The results show that the FRP sheets can be used to ...
متن کاملFatigue-loading effect on RC beams strengthened with externally bonded FRP
Externally bonded carbon-epoxy fiber-reinforced polymers (CFRPs) have been widely used to restore or increase the capacities of reinforced concrete beams (Meier et al., 1992; Neale and Labossière, 1997; Varastehpour and Hamelin, 1997). A typical reinforced concrete bridge deck may experience up to 7x10 stress cycles during the course of a 120year life span (Barnes and Mays, 1999), while an over...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2019
ISSN: 1996-1944
DOI: 10.3390/ma12132163