Shear Behavior of Sands Depending on Shear Box Type in Direct Shear Test
نویسندگان
چکیده
منابع مشابه
Shear Strength of Fiber-Reinforced Clayey Sands
Consolidated-drained triaxial compression tests were conducted to compare the stress-strain and volume change response of sands and clayey sands reinforced with discrete randomly distributed poly-propylene fibers. The influence of various test parameters such as fiber content (0.0%, 0.5% and 1.0% by weight), clay content (0%, 10% and 20% by weight), relative density (50% and 90%) and confining ...
متن کاملEffect of type and distribution of shear studs on the behavior of composite steel-concrete shear walls
In this research in-plane shear Behavior of composite steel-concrete shear walls was investigated considering the Effects of steel plates thickness, spaces between shear studs, shape and type of shear studs and existing of minimum reinforcement in wall section. Several finite element models were analyzed and Numerical results of two models were taken under verification with existent experimenta...
متن کاملParticle Size Effect on Shear Strength of Granular Materials in Direct Shear Test
The effect of particle size on shear strength of granular materials are investigated using direct shear tests. Small direct shear test (60 mm by 60 mm by 24 mm deep) were conducted for particles passing the sieves with opening size of 2.36 mm. Meanwhile, particles passing the standard 20 mm sieves were tested using large direct shear test (300 mm by 300 mm by 200 mm deep). The large direct shea...
متن کاملundrained triaxial shear behavior of grouted carbonate sands
the effects of cementation and the physical properties of grains on the shear behavior of grouted sands are investigated in this paper. the consolidated-undrained triaxial shear behavior of three grouted carbonate sands with different physical properties, including particle size distribution, particle shape and void ratio, was studied. two sands were obtained from the north shores of the persia...
متن کاملStudying the effect of roughness on soil-geotextile interaction in direct shear test
Abstract One of the methods of increasing soil resistance against failure is soil reinforcement using geosynthetics. Soil-geosynthetic interactions are of great importance and are affected by friction and adhesion at their interface. Soil gradation, contact surface roughness and geotextile density are among the factors affecting soil-geotextiles interaction this study, to investigate the eff...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Geotechnical Society
سال: 2015
ISSN: 1229-2427
DOI: 10.7843/kgs.2015.31.3.51