Shaping of Aluminum Foam during Foaming Process Using Stainless Steel Mesh Mold
نویسندگان
چکیده
منابع مشابه
Air Flow through Woven Stainless Steel Mesh
It was known that a mesh screen placed across an airflow will have an evening effect, distributing both the velocity and pressure across the screen, however this effect had not been quantified and the effect of different mesh geometries was unknown. It was desired to understand the relationship between airflow velocity, the pressure behind the screen and the free hole area of the screen. It was...
متن کاملOperational Cost Analysis for the Treatment of Various Textile Effluents by Electrochemical Process Using Stainless Steel and Aluminum Electrodes
The development of treatment processes from laboratory scale to industries involves a lot of troubles due to the automation of process parameters and fluctuated characteristics of wastewater. In the present study, six different real-time textile effluents of samples such as S1 to S6 are characterized and treated by electrocoagulation process using Stainless Steel (SS) and Aluminum (Al) elec...
متن کاملCompressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents
In present research, the foam glass-ceramic composites fabricated by window glass, steel slag and SiC, CaCO3 foaming agents were investigated by press–sintering method. The optimum sintering temperature was obtained at 1200°C with a 3-minutes holding time and 20°C/min heating rate. The optimum pressure level of 80 MPa for achieving the 70 % of relative density was selected. The effec...
متن کاملProcess Piping: Polymers Versus Stainless Steel
choice for pharmaceutical industry process systems. Its high mechanical strength and low coefficient of thermal expansion allow components to be sterilised or sanitised using various mediums and at high temperatures. Concerns about stainless steel systems – such as rouging in high purity water, metallic ion contamination and inner surface finishes – which require post-installation maintenance a...
متن کاملManufacture of Aluminum Closed-cell Foam by ARB process using CaCO3 as the blowing agent
Metal porous foams have been eliciting much interest in recent years due to their high capacity of energy absorption. The characteristics of the pores in these materials play an important role on their energy absorption capability and other properties. This study reports the fabrication of aluminum closed-cell foams by accumulative roll-bonding (ARB) technique using calcium carbonate (CaCO3) as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 2018
ISSN: 0021-4876,1880-6880,2433-7501
DOI: 10.2320/jinstmet.j2018044