Shape Optimization in High Temperature Processes
نویسندگان
چکیده
منابع مشابه
Shape optimization and preform design in metal forming processes
A continuum sensitivity analysis is presented for the computation of the shape sensitivity of ®nite hyperelastic±viscoplastic deformations involving contact with friction using a direct dierentiation method. Weak shape sensitivity equations are developed that are consistent with the kinematic analysis, constitutive sub-problem as well as the analysis of the contact/friction sub-problem used in...
متن کاملHigh Cycle-life Shape Memory Polymer at High Temperature
High cycle-life is important for shape memory materials exposed to numerous cycles, and here we report shape memory polyimide that maintained both high shape fixity (Rf) and shape recovery (Rr) during the more than 1000 bending cycles tested. Its critical stress is 2.78 MPa at 250 °C, and the shape recovery process can produce stored energy of 0.218 J g(-1) at the efficiency of 31.3%. Its high ...
متن کاملOptimization of Integrated Low-Temperature Gas Separation Processes Using SA Method and Different Refrigerants
In low-temperature processes, heat rejected from separation columns is removed by refrigeration systems to heat sinks (reboilers & pre-heaters), process streams, other <span style="font-size: 10pt; col...
متن کاملMinireactor-based high-throughput temperature profiling for the optimization of microbial and enzymatic processes
BACKGROUND Bioprocesses depend on a number of different operating parameters and temperature is one of the most important ones. Unfortunately, systems for rapid determination of temperature dependent reaction kinetics are rare. Obviously, there is a need for a high-throughput screening procedure of temperature dependent process behavior. Even though, well equipped micro-bioreactors are a promis...
متن کاملShape Optimization of an Arterial Bypass in Cardiovascular Systems
A high performance numerical technique in the study of aorto-coronaric bypass anastomoses configurations using steady Stokes equations is presented. The problem is first expressed as an optimal control problem. Then, by using an embedding method, the class of admissible shapes is replaced by a class of positive Borel measures. The optimization problem in measure space is then approximated by ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: PAMM
سال: 2019
ISSN: 1617-7061,1617-7061
DOI: 10.1002/pamm.201900208