Shape Factor Effect on Inclusion Sedimentation in Aluminum Melts
نویسندگان
چکیده
منابع مشابه
Expansion Mechanism in Foaming Aluminum Melts
The expansion of molten aluminum foam was studied to determine flow mechanisms in the cellular melt. The structure of the foaming melt evolved through a series of deformation stages before the foam stabilized and solidified. Changes in cell geometry during foam expansion were observed at different positions within the mold cavity and analyzed to determine flow mechanisms. The deformation patter...
متن کاملeffect of mouth shape on the flow pattern and sedimentation in the vertical lateral diversion
abstract one of the most important sources of drinking and agricultural water needs is rivers. one of the oldest methods of getting water from rivers that still has the greatest use is the gravity intake. in this type of intake, due to the disproportionate velocity at the upstream and downstream mouth of intake, occur flow separation and following sedimentation at the upstream mouth. in this st...
متن کاملNEURAL NETWORK PREDICTION OF THE EFFECT OF SEMISOLID METAL (SSM) PROCESSING PARAMETERS ON PARTICLE SIZE AND SHAPE FACTOR OF PRIMARY α-Al ALUMINUM ALLOY A356.0.
Abstract: Problems such as the difficulty of the selection of processing parameters and the large quantity of experimental work exist in the morphological evolutions of Semisolid Metal (SSM) processing. In order to deal with these existing problems, and to identify the effect of the processing parameters, (i.e. shearing rate-time-temperature) combinations on particle size and shape factor, ...
متن کاملThe effect of welding parameters on the formation of S-shape defects in friction stir welding of aluminum 1085
In this paper, the effects of welding parameters involving tool shape, title angle, rotational speed and welding speed on the S-shape defect formation have been investigated. For this purpose friction stir welding process were done on the Al-1085 plates by cylindrical, Triangle and square pins. The welded sections were studied by metallographic, radiography and SEM methods. The results showed t...
متن کاملThe effect of welding parameters on the formation of S-shape defects in friction stir welding of aluminum 1085
In this paper, the effects of welding parameters involving tool shape, title angle, rotational speed and welding speed on the S-shape defect formation have been investigated. For this purpose friction stir welding process were done on the Al-1085 plates by cylindrical, Triangle and square pins. The welded sections were studied by metallographic, radiography and SEM methods. The results showed t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions B
سال: 2020
ISSN: 1073-5615,1543-1916
DOI: 10.1007/s11663-020-01769-0