Sewage sludge melting by the arc furnace system.
نویسندگان
چکیده
منابع مشابه
Hydrogen utilization by clostridia in sewage sludge.
A sporeformer morphologically different but physiologically similar to Clostridium aceticum Wieringa was isolated from sewage sludge. It used large amounts of H2 and CO2, converting them chiefly to acetic acid. Growth occurs anaerobically on yeast extract alone, but after the nutrients in yeast extract are used, growth continues at a reduced rate, supported by the conversion of the gases to ace...
متن کاملModeling of Power Control of Arc Steel Melting Furnace with Fuzzy Correction of Regulation Signal
A system for arc steel melting furnace arcs power control with fuzzy corrector is proposed. Digital model of the system was created and numerical simulation under influence of deterministic and random disturbances of arc lengths were conducted. Results of simulations are shown, which prove improvements of dynamic and static indices of arc power regulation. Streszczenie. Praca przedstawia system...
متن کاملBehaviour of Cd, Cr, Mn, Ni, Pb, and Zn in sewage sludge incineration by fluidised bed furnace.
Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal c...
متن کاملGraphite Electrode DC Arc Furnace
Innovative Technology Summary Reports are designed to provide potential users with the information they need to quickly determine if a technology would apply to a particular environmental management problem. They are also designed for readers who may recommend that a technology be considered by prospective users. Each report describes a technology, system, or process that has been developed and...
متن کاملThe Drying of Sewage Sludge by Immersion Frying
The objective of this work was to dry sewage sludge using a fry-drying process. The frying experiments were carried out in commercial fryers modified by adding thermocouples to the setup. During frying, typical drying curves were obtained and it was verified that, in relation to the parameters: oil temperature, oil type and shape of the sample, the shape factor the most effect on the drying rat...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Environmental Conservation Engineering
سال: 1988
ISSN: 1882-8590,0388-9459
DOI: 10.5956/jriet.17.381