Service Load and Fatigue Strength : Report 8, Crack propagation of Medium Carbon Steel under Two-Fold Multiple Repeated Stress in Tow-Stress Levels and Three-Fold Multiple Repeated Stress in Three-Stress Levels
نویسندگان
چکیده
منابع مشابه
Effect of Mean Stress on Low-Cycle Fatigue Strength of a Medium Carbon Steel S45C - True Stress-Controlled Cycling- by
Effect of Mean Stress on Low-Cycle Fatigue Strength of a Medium Carbon Steel S45C True Stress-Controlled Cyclingby Tatsuo ENDO*, Shoji HARADA*, Yoshihiro FUKUSHIMA* and Haruo SAKAMOTO** Nominal stress-controlled low-cycle fatigue life under imposed mean stress is affected by elongation or contraction due to cyclic stress-induced creep. Therefore, the effect of mean stress was examined by a micr...
متن کاملCrack propagation and fracture in silicon wafers under thermal stress
The behaviour of microcracks in silicon during thermal annealing has been studied using in situ X-ray diffraction imaging. Initial cracks are produced with an indenter at the edge of a conventional Si wafer, which was heated under temperature gradients to produce thermal stress. At temperatures where Si is still in the brittle regime, the strain may accumulate if a microcrack is pinned. If a cr...
متن کاملStress- Corrosion Crack Initiation of High-strength Pipeline Steel in Near-neutral pH Environments
Stress-corrosion cracking (SCC) tests were conducted in the near-neutral pH standard solution, NS4, and in an actual soil solution, using four-point bending at a high stress ratio and low frequency conditions very similar to those of operational pipelines. Pitting incubation appeared first and then pitting initiated and grew in both solutions although there were many more pits on the specimen t...
متن کاملInfluence of Residual Stress Field on the Fatigue Crack Propagation in Prestressing Steel Wires
This paper deals with the effect of several residual stress profiles on the fatigue crack propagation in prestressing steel wires subjected to tension loading or bending moment. To this end, a computer program was developed to evaluate the crack front evolution on the basis of the Walker law. Results demonstrate that the absence of residual stresses makes the crack propagate towards a preferent...
متن کاملNumerical and Experimental Evaluation of Residual Stress and Fatigue Strength of Steel CK35 in Shot Peening Process
In shot peening process the work piece surface is struck by a large number of balls and compressive residual stress is generated on the surface. So, mechanical properties such as fatigue strength, stress corrosion resistance, smooth shape and ... will improve. In this paper, the balls with a speed of 100 to 200 m/s were struck on the steel samples and fatigue strength compared with specimens wi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1968
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.34.1854