Serration, deformation band, and strain marking in a 5083 aluminum alloy at 318 K and related tempereture dependencies
نویسندگان
چکیده
منابع مشابه
Effect of geometrical variable and welding sequence on residual stresses and deformation in a 5083-H321 aluminum T joint
Studies on welding process of Aluminium weldments shows that post-weld residual stress and deformation are influential on structure efficiency and there are different variable which affect these stresses and deformation. In this study the effect of geometrical variables and welding sequence on residual stresses and deformation in Aluminium H321 have investigated by the finite element software A...
متن کاملEffect of geometrical variable and welding sequence on residual stresses and deformation in a 5083-H321 aluminum T joint
Studies on welding process of Aluminium weldments shows that post-weld residual stress and deformation are influential on structure efficiency and there are different variable which affect these stresses and deformation. In this study the effect of geometrical variables and welding sequence on residual stresses and deformation in Aluminium H321 have investigated by the finite element software A...
متن کاملSerration Behavior in Pd77.5Cu6Si16.5 Alloy
The strain-rate-dependent plasticity under uniaxial compression at the strain rates of 2× 10−3, 2 × 10−4 and 2 × 10−5 s−1 in a Pd77.5Cu6Si16.5 alloy is investigated. At different strain rates, the serration events exhibit different amplitudes and time scales. The intersection effects take place obviously, and the loading time is much longer than the relaxation time in the serration event at thr...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2007
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.57.398