Separation performance of vortex-type settling tank.
نویسندگان
چکیده
منابع مشابه
Grey-box modelling of aeration tank settling.
A model of the concentrations of suspended solids (SS) in the aeration tanks and in the effluent from these during Aeration tank settling (ATS) operation is established. The model is based on simple SS mass balances, a model of the sludge settling and a simple model of how the SS concentration in the effluent from the aeration tanks depends on the actual concentrations in the tanks and the slud...
متن کاملOptimization of Settling Tank Design to Remove Particles and Metals
Mass reduction rates of particles and metals were simulated for a two-compartment settling tank composed of a storage compartment and a continuous flow compartment. Particle-size distribution, rainfall, and flow data from 16 storm events measured at three highway sites were used. The volume ratio i.e., ratio of surface areas for a given depth between storage and continuous flow compartment was ...
متن کاملeffects of curvature submerge vane in efficiency of vortex settling basin
in this century due to population growth, the use of river water has become more complicated. since most rivers pass across loose and erodible areas, they always act as the most important factor of transferring eroded materials from the solid crust of the earth. vortex basins are among the solutions known for the high-speed separation of solids from liquids (filtration). one of the problems of...
متن کاملAmplifier Design for Fast Settling Performance
A design strategy for minimizing a feedback amplifier’s step-response settling time is introduced. Central to this approach is the clear identification of the independent design parameters characterizing the amplifier and the introduction of a figure of merit for assessing the settling performance of an amplifier that is independent of power, supply voltage and capacitive loading. With this app...
متن کاملRelative importance of secondary settling tank models in WWTP simulations – A global sensitivity analysis using BSM2
Results obtained in a study using the Benchmark Simulation Model No. 1 (BSM1) show that a one-dimensional secondary settling tank (1-D SST) model structure and its parameters are among the most significant sources of uncertainty in wastewater treatment plant (WWTP) simulations [Ramin et al., 2011]. The sensitivity results consistently indicate that the prediction of sludge production is most se...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KAGAKU KOGAKU RONBUNSHU
سال: 1989
ISSN: 0386-216X,1349-9203
DOI: 10.1252/kakoronbunshu.15.202