Separation of surface and bulk reflectance by absorption of bulk scattered light
نویسندگان
چکیده
منابع مشابه
Separation of surface and bulk reflectance by absorption of bulk scattered light.
A method is proposed for separating light reflected from turbid media with a rough surface into a bulk and a surface component. Dye is added to the sample, thereby increasing absorption and canceling bulk scattering. The remaining reflected light is surface reflectance, which can be subtracted from the total reflectance of an undyed sample to obtain the bulk component. The method is applied to ...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Change of diffused and scattered light with surface roughness of p-type porous Silicon
Porous silicon samples were prepared by electrochemical etching method for different etching times. The structural properties of porous silicon (PS) samples were determined from the Atomic Force Microscopy (AFM) measurements. The surface mean root square roughness (σ rms) changes as function of porosity were studied, and the influence of etching time on porosity and roughness was studied too. U...
متن کاملChange of diffused and scattered light with surface roughness of p-type porous Silicon
Porous silicon samples were prepared by electrochemical etching method for different etching times. The structural properties of porous silicon (PS) samples were determined from the Atomic Force Microscopy (AFM) measurements. The surface mean root square roughness (σ rms) changes as function of porosity were studied, and the influence of etching time on porosity and roughness was studied too. U...
متن کاملthe effect of bulk depth and irradiation time on the surface hardness and degree of cure of bulk-fill composites
statement of problem: for many years, application of the composite restoration with a thickness less than 2 mm for achieving the minimum polymerization contraction and stress has been accepted as a principle. but through the recent development in dental material a group of resin based composites (rbcs) called bulk fill is introduced whose producers claim the possibility of achieving a good rest...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 2013
ISSN: 1559-128X,2155-3165
DOI: 10.1364/ao.52.004749