Separation of oil from oil-in-water mixtures by flow through glass bead beds.
نویسندگان
چکیده
منابع مشابه
In-line Oil-water Separation in Swirling Flow
An in-line oil-water separator has been designed and is investigated for singleand two-phase flow. Numerical single-phase flow results show an annular reversed flow region. This flow pattern agrees qualitatively with results from measurements. In the two-phase flow simulations two different drag laws have been used to model the interaction between the phases. The velocity field of the singleand...
متن کاملSeparation of oil and water in oil spill recovery operations *
The separation of water from oil that is collected in any oil spill recovery operation is a continuing and necessary requirement during every stage of the effort. Its importance is reflected in the cost of transport and storage of large volumes of oily water, the salvage value of separated oil and the added labor costs associated with long-term recovery operations. This paper addresses the effe...
متن کاملVortex and Oil Distribution of Oil-Water Annular Flow through Ball Valve
The study on the flow behave inside of a ball valve is important for heavy crude oil transportation. Owe to the fast progress of the numerical technique, it becomes an effective way to observe the flows inside a valve and to analyze the flow structure of the oil-water core annular flow. In the present study, the simulation of the oil-water core annular flowing through the valve is conducted...
متن کاملInterfacial behaviour in water-oil-amphiphile mixtures
Using a lattice model for water-oil-amphiphile mixtures, we examine the interfaces between the water-rich, oil-rich and disordered phases in the mean-field and Bethe approximations. By calculating the surface tensions between these phases along their coexistence triple line, we find that the disordered phase wets the water-oil interface when it is an ordinary disordered fluid but not when it is...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1985
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.18.509