Separation of oil from oil-in-water mixture by glass fiber beds.
نویسندگان
چکیده
منابع مشابه
Separation of oil and water in oil spill recovery operations *
The separation of water from oil that is collected in any oil spill recovery operation is a continuing and necessary requirement during every stage of the effort. Its importance is reflected in the cost of transport and storage of large volumes of oily water, the salvage value of separated oil and the added labor costs associated with long-term recovery operations. This paper addresses the effe...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Separation of reaction mixture after ethanolysis of rapeseed oil
Various effects on the separation of raw reaction mixture after the ethanolysis of rapeseed oil were investigated. Water addition, initial temperature of separation, centrifugation, ionic compound addition and time effects affecting concentrations of potassium, free glycerol and yield of the ester phase were found out. Centrifugation has the most positive effect. Finally, correlation between co...
متن کاملDynamic Oil-in-Water Concentration Acquisition on a Pilot-Scaled Offshore Water-Oil Separation Facility
This article is a feasibility study on using fluorescence-based oil-in-water (OiW) monitors for on-line dynamic efficiency measurement of a deoiling hydrocyclone. Dynamic measurements are crucial in the design and validation of dynamic models of the hydrocyclones, and to our knowledge, no dynamic OiW analysis of hydrocyclones has been carried out. Previous studies have extensively studied the s...
متن کاملFacile approach in fabricating superhydrophobic and superoleophilic surface for water and oil mixture separation.
Metal copper mesh with superhydrophobic and superoleophilic surface had been successfully fabricated via a facile solution-immersion process. The hierarchical structure was prepared on the commercial copper mesh surface by etching with the nitric acid. After being modified by 1-hexadecanethiol (HDT), the as-prepared mesh indicated both superhydrophobic and superoleophilic property simultaneousl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1988
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.21.457